How to install led neon strips?

[pysong]

How to install led neon strips?



Fristly, do you know what's led neon flex rope light? Let's have simple introduction here, it's a direct lighting sources,using silicone and led strips extrusion molding technology,lighting will be more softly,uniformly and have no light spot,waterpoof IP67,widely used for interior ceiling,background wall,closet,under cabinet, exterior building facade decoration etc.To get more news about led neon rope light, you can visit htj-led.com official website.

How to install led neon strip lights, from cutting,wiring, end cap, fixed accessories and power supply?
1.Turn off the power before wiring (The installation is tough and potentially dangerous, so call a certified electrician for assistance)
Shenzhen XLX Light Source all Led neon rope lights have clear cutting line design, you could cut the length your project needed,as for led neon light series, available width from 4mm to 20mm, could apply to all kinds of indoor and outdoor lighting projects.

8.Put end cap into led neon lights (After injecting glue, the LED strip should be placed horizontally for two hours until the LED strip is dry, then finish the next operation, and it will be completely dry after 24 hours)

9.Use screws to fix the clips or carriers on the mounting position.LED Neon flex, it's bendable, have top bend, and side bend, so you could make also make some shapes by using this fixed clips.

10.Use screws to fix the aluminum profiles.Led neon ceiling lighting solution, it could be installed with this, will have a great linear lighting effect.

[Mieszkaniowy]

Ładowanie ogłoszeń...